Our editors make independent research and tests of the recommended products. We may receive a commission on the purchases made from the selected links.
Installing a carpet on the boat is an important process, and requires good preparation. Carpets on the boat floors help to prevent slipping incidents and provide traction. To install the carpet, you will need the carpet itself, tools, and good carpet glue. Choosing the right glue type that will keep carpets in place is the crucial part. In this post, I’ve collected the list of the best marine carpet glue available on the market, that will create the strongest bond with any floor surface. Read on, and I hope you will make the right choice!
Our Top Picks – Best Marine Carpet Glue
Best overall: Dap 00442 Weldwood All-Weather Outdoor Carpet Adhesive at Amazon ($12.52)
High-strength boat carpet glue
ROBERTS 6700-0 Carpet Adhesive at Amazon ($8.67)
Environment-friendly and works for many surfaces
Henry 12185 #663 Carpet Adhesive at Amazon ($27.66)
Waterproof, suitable for beginners
Advanced Adhesive Technologies Carpet Adhesive at Amazon ($54.11)
Creates a strong bond when fully cured
Value Carpets Marine Grade Boat Carpet Adhesive Glue at Amazon ($60)
Non-flammable and easy to apply
Marine Upholstery Glue by Polymat at Amazon ($30)
Easy spray-on application
RecPro Gallon Roll On Floor Marine (Boat) Grade Glue at Amazon ($45)
Easy to apply with a roller or a trowel
Boat Carpet Central Glue 2 Gallon at Amazon ($88)
Professional-looking finish, easy to apply with roller, trowel, or paintbrush
This solvent-based adhesive ensures a strong and permanent bond and can be used for boat carpets and artificial turf. There are a few things to keep in mind when working with this glue: it smells a bit, so if you can’t stand the chemical odors, please buy a mask. It’s also advisable to start with a small area until you learn how to glue the whole carpet. You can use a little paint palette to take it out of the container and spread it out, and then use a bigger paint trowel to do the job. Metal trays are better because you can use the solvent to clean and use them again.
Carefully read the instructions on the jar label before use. I’m sure this glue will help you finish the job successfully!
One of the greatest advantages of this outdoor marine carpet glue is that it can be used in operating conditions from 45-100 degrees. Usually, for many types of glue, the temperature is at least 60 degrees Fahrenheit, so I am very impressed.
This adhesive is also suitable for treated wood. It is very universal, you just have to make sure the wood surface is cleaned and dried before use. It is also suitable for various other surfaces, such as concrete, wood, asphalt, and even aluminum.
Unfortunately, it does not perform well on vinyl, although it can still bond, the edges are easy to peel off.
The adhesive itself is very sticky, has a good hold, and can be applied with a trowel.
Roberts is a long-established name in the household products industry. I personally love it for the variety of flooring installation tools and products, which are always up to the highest quality standards.
It can be used for various outdoor and indoor carpets, decks, basements, and even sunrooms. You can use it to glue concrete, aged asphalt, marine-grade plywood, fiberglass, and aluminum. That’s a lot of options!
Interestingly, this marine carpet glue has an 80% RH and up to 5 lbs. MVER. It has an open time of up to 30 minutes, a working time of up to 60 minutes, and a curing time from 24 to 48 hours. Pretty convenient and give you a lot of time to apply and fix the errors if necessary. 1 gallon is enough to cover up to 120 sq. ft. of the surface. The manufacturer suggests that it’s better to use with a 1/8 in. x 1/8 in. x 1/8 in. U-notch trowel.
Roberts carpet glue can be applied to bond most rubber, polypropylene, urethane, and tufted indoor/outdoor carpets, and woven or needled/fleece.
It is non-flammable and can be used in spaces where flammable glues are a health risk from smoke gases or flashback fires.
Many people use this glue for laying the carpet floors on the pontoon boat. It works very well for such type of job. You can use a paint roller to apply it to the surface. The texture of the marine glue is very thick, however, the paint roller will manage the application without any problems. The adhesion of the carpet will leave you pleasantly surprised.
It suits for laying rubberized carpets that are regularly exposed to water in a boat. This glue is easy to use, quick to apply, yet forgiving so you can work with it and get parts into place on the go.
If you have a larger boat and need an excellent holding marine-grade carpet this is the best option. This glue comes in at a 1-gallon package and it should be enough to glue the area of approximately 140 feet. Depending on your floor type and the baking of the carpet this amount may even be a little larger.
What makes it perfect for the carpet installation is the setup time is quite slow it means that he will have enough time to make necessary adjustments. You can move and adjust the carpet if you notice that you haven’t laid it straight. Another thing I like about this carpet glue is that it doesn’t have a toxic smell. Of course, I always recommend wearing a protective mask for any carpet installations. But with this product, it’s up to you. Unlike other products, it is extremely easy to store and you can even place it in cold temperatures. This carpet glue can be frozen and doesn’t lose adherence power. Indeed it can be frozen up to 5 times.
Is it only disadvantage that I found is that this glue doesn’t cure fast on the aluminum surface so you will have to let it sit in for around three days. If your place the boat in the Sun it will speed up the process to around two days.
It has super high reviews on Amazon, and many people said that this is the most high-quality carpet glue for marine use that they have ever bought. Some buyers said that they used a little more glue than was suggested but they would definitely recommend it as it holds the carpet firmly in place.
This top-rated carpet adhesive is recommended for the following types of carpet backings: rubber, jute, woven polypropylene, latex unitary, PVC, waffle backs, marine backs, and even the urethane cushion. As you see, it’s quite universal. It comes in a 4-gallon container.
Since this product is specifically created for their moist environment if you don’t have to worry about how long this adhesive will last when in contact with water. Plus, it has an innovative antimicrobial technology that prevents the development of mold, mildew, and other microorganisms.
It is the most suitable for flat surfaces you can also try it for the fold-over edges and vertical surfaces but it won’t be that effective. It doesn’t contain solvent and works best for the rubber-backed carpet. For better results make sure that you fit the carpet in a place where are you plan to install it because once you apply the glue and it sits in, it won’t be so easy to adjust.
When it is completely dry, it leaves a powerful bond that is very water-resistant. This glue ensures long-term use without the need for a new administration at short notice. Therefore, it prevents mildew and dampness from attacking the carpet.
Another benefit of this product should be its non-flammable and solvent-free formula. Because of these properties, the glue is harmless for us and the environment that surrounds us, so we can use it with confidence without worrying about the bad effects it will have on nature. Moreover, this adhesive has a working temperature span of 65-90F.
What made me add it to my top marine carpet glue picks list is that this boat glue really works, even if your boat floor surface is pressure-treated boat plywood, it will not damage it and will make the carpet stick to the floor. It’s the best adhesive for bonding carpet to wood. I took the 1/8″ and 3/32″ notched trowels for application.
Marine-grade glue is environmentally friendly and easy to install. This water-based outdoor and marine carpet adhesive is non-flammable and can be applied on most ship surfaces such as wood, fiberglass, aluminum, and steel. A whole gallon of carpet glue covers approximately 120 square feet. A 1/8″ notched trowel or 3/32″ notched trowel should be used.
Next to the plywood, I saw it also sticks well to the gel coat. However, the surface must be thoroughly cleaned to improve the adhesion of the adhesive. Make sure that you don’t have wax or oil residue on the surface. You also have to use lacquer.
Although solvent-based boat glues are more effective, they may contain toxic chemicals, dangerous for health and the environment. The advantage of this adhesive made by the Value Carpets is its innovative environmentally-friendly formula, making it a safer option. Moreover, this marine carpet glue is also non-flammable.
Value Carpet marine glue may not be as common as the majority of other carpet adhesive options, but in my opinion, it’s worth considering. It is packed in a 1-gallon container and covers an area of approximately 115 sq. feet.
If you like quick-drying glue, this is not for you. Some buyers were left frustrated, as this glue takes a long time to set.
The next item on my list is a professional-grade marine upholstery glue, created specifically for use in a damp environment. It’s extra durable and has a high resistance to salt, oil, and gas. What I found great about this glue is that it’s fast-drying and heavy-duty. You can glue not only carpets but a whole range of boat elements – foams, paper, wood, and metals.
It’s a spray glue, so it makes application very easy – you don’t have to worry about creating an even layer. However, you have to be careful and use a protective face mask, rubber gloves, and goggles.
You can use this marine carpet glue to stick together carpet and steel pieces. For better results, spray both the carpet backing and the metal. Once you place the carpet on the metal base, it will stick to it almost immediately. Make sure you measure everything well beforehand because you won’t be able to move the carpet around after the application.
In case some of this glue gets on your hand or other body parts, remove it with Kerosine.
Polymat marine glue bonds the surfaces within minutes and holds great. Carpets stay in place, secured, and without the curled edges. Highly recommended product.
RecPro offers a marine-grade carpet glue that is worth every penny. This glue is available in a 1-gallon container. It will be enough to glue the carpet area of around a hundred square feet. The texture of this glue is very thin so you can apply it on the surface very easily. You can spread it without extra effort. This product is water-based and should be applied directly on the subfloor. All you have to do is pour it from the container and spread it around. Actually, that’s why it’s more budget-friendly because 1 gallon will be enough to cover a large surface.
Mind, that this glue dries quickly, so you have to hurry up when installing the carpet.
Advantages include a water-based formula that is safe to use for your health and for the environment. Unlike other solvent-based glues RecPro it’s very easy to clean. Plus, this marine carpet glue can survive extreme temperatures and does not peel off or warp.
It’s recommended for use primarily with vinyl, thermoplastic polyolefin, and coin-floors, but can also be used with plywood floors, fiberglass, and PVC panels.
Seems to go well with marine vinyl plus is also great for gluing carpets to wood. Although this adhesive is not suggested for aluminum, you can try and apply some lacquer thinner on the aluminum surface. This way it may stick.
BoatCarpetCentral adhesive is sold in 1-gallon pails. This versatile carpet adhesive can be applied to concrete, marine plywood, fiberglass, particle board, aluminum. It is safe to use on rubberized carpets and won’t deteriorate over time like alcohol-based adhesives).
This boat glue is what you need to securely attach your new carpet and create a perfect-looking floor.
The water-based formula of this boat carpet adhesive is also an advantage for me. It doesn’t contain any alcohol-based ingredients, unlike other adhesives. This glue will not damage the backing of the carpet. You can easily apply and spread it with a trowel.
When you buy marine-grade carpet glue, it’s not recommended to go cheap. Some boat glues will eat up the back of the carpet over time. BoatCarpetCentral glue is recommended by all boat manufacturers. It’s well worth spending a little more. This boat adhesive can be used on deck boats, pontoons, jon boats, bass boats, ski boats, or even on the patio. This carpet adhesive should not be applied to pressure-treated plywood.
Another benefit of this carpet glue is that it doesn’t have a chemical smell because it is water-based, unlike the solvent-based equivalents that can bother people with delicate breathing.
How to Choose the Best Marine Carpet Glue
There are so many carpet glue options on the market that it may be a little confusing to choose the best one for your boat. The process of carpet selection for the boat is a little bit different – the carpet that you chose for the boat needs to have a marine-grade certification. Otherwise, if you choose regular glue your carpet will not stick to the boat floor.
What makes boat carpets different is that they have special baking created to protect your boat’s inside surface from harsh weather conditions and humidity. That’s why you have to choose the correct type of glue approved to use in a wet environment. Otherwise, if you get the wrong type of glue it can even destroy your floors.
That’s why it is important to understand how to choose the best marine carpet glue and which type is the best. In the selection process, you have to consider a few factors that I have listed below.
Evaluate the type of surface on which you will install the carpet. As you have seen from the list above different types of glue suit different types of surfaces. The quality of the final result will be determined by this surface and the preparation.
Find out which carpet baking type you need for your boat. The type of backing of your carpet will determine the type of carpet glue that is safe to use with it. If you have already started selecting the carpet you might have noticed that the majority of them have a rubber backing. Check out if a specific type of glue is safe with it.
In general, there are two most popular types of marine carpet glue. The first one is solvent-based. I usually don’t recommend it because it is more toxic and has harsh chemicals. You will also need a special solvent to remove this glue if something goes wrong. The second type is less toxic, it is water-based carpet glue. It is great for the rubber-backed carpets because it will not destroy their structure.
You have to decide how strong should be your carpet glue. It’s one thing if you are looking for temporary carpet flooring and another one if you plan to use these carpet floors for many years. If you choose solvent-based adhesives, they are super strong and you will not remove and replace your carpet easily. It won’t be possible to do without damaging the carpet.
Measure an area that you would like to get carpeted. The amount of glue, the package, and the total price will depend on this measurement. In general, gallon-sized glue in the buckets will let you cover a larger area. From this point of view, it is more budget-friendly.
When choosing the best glue for boat carpet, consider a drying time. Different types of glue and different manufacturers have various drying times. It all depends on your skills. If you know exactly how to install the carpet and are looking to save time choose glue with a short curing time. If you will have to make arrangements in the process and fix your errors a slower curing glue will be more suitable.
Consider extra protection features of the glue. Many glue products have waterproof, mold and mildew proof, and weatherproof features. If this is something you need to find out beforehand by reading the label.
Marine Carpet Glue Types Explained
The first type of carpet adhesive is solvent-based. It generally has a shorter curing and bonding time that’s why it is best for mature boat owners. It also creates the strongest bond between the carpet and the floor. The bond is so strong that you will probably have to replace the carpet completely if you wish to adjust it. This type of glue is perfect for long-term applications and for areas with high traffic. Unfortunately, solvent-based marine carpet glues are not environmentally friendly. They have a strong chemical smell and include a lot of pollutants. Even working with this glue is dangerous you should always protect yourself by wearing a mask and gloves.
The second most popular carpet glue type is water-based. It creates a relatively weaker bond if you compare it to the solvent-based. However, it is still the most popular type because it is easier to apply easier to spread on the surface and it’s more affordable. Plus you don’t have to worry about breathing in the chemical fumes. The drying time of water-based adhesives is slower. However, this is also an advantage or depends on how you look at this. Slower curing time leaves you more space for the error so you can fix and move the carpet before it dries.
Apart from the two mentioned types, we can also divide marine carpet grows into buckets and aerosol types. If a majority of carpet glues are sold in gallon-sized buckets. If these are convenient and comfortable to use plus you always know how much glue you need for the specific floor service. Aerosol adhesives are easy to apply, however they are more costly. They can also leave more mess.
In order to ensure that the boat carpets are properly installed, you have to get a quality marine-grade adhesive. With one of the best marine carpet glue picks from the list above you’ll be able to install boat carpet like a pro! Hope it will serve you for many years to come.