How to Cut a Rug

If for some reason you need to cut a rug, you better plan everything beforehand not to make an error. Cutting a rug isn’t something you can reverse later so you have to consider many factors and have the proper materials to do the job. The good news is that the area rug can be cut with a few exceptions. The reasons for cutting may be many, for example, your favorite rug doesn’t fit into a new interior layout and the furniture. Or maybe you have moved to a new apartment and it no longer fits. In this case resizing is a good option but don’t attempt it on the antique rugs and rugs are made of delicate materials such as silk. Read on and you will find out how to cut the rug safely and how to take care of the edges after cutting.

Prepare Everything You Need to Cut a Rug

First of all, you have to prepare the wrong end of the necessary materials for the process. You may start with washing the rug and giving it a deep cleaning. This step is done to make sure that there are no impurities and that all the fibers are fluffy, so you will make a precise cut. Check out our best ways to clean the rug with do-it-yourself cleaning solutions. After you have cleaned the rug you have to let it dry or use a hairdryer or a fan to speed up the process and proceed to the next step.

After the rug is dry, give it some brushing. If this isn’t done in order to stretch the fibers.

Prepare all the necessary equipment. This is all you will need to cut a rug at home by yourself: 

Step by Step Rug Cutting Process

Now it’s time to measure how much of a rug you wish to cut off. As you see I have listed measuring tape in the list of supplies, use it to find out how many inches you want off. Mark the doors along with the measuring tape. Later these dots will show the line of the cut. Use a straight edge and connect the dots that you have made along with the measuring tape. Now you have a straight line along which you will make a cut.

The next step is very important as some inexperienced homeowners do the cutting directly on the floor. Put some cardboard or wood under the rug – when you make the cutting your floor will not be scratched by the knife.

Place your rug upside down on the piece of wood. Let’s start to cut it – move slowly to make sure that you follow the drawn line. If you have a nice utility knife this process should be very easy and exciting!

Once the rug is cut you have to take care of the edges. For this process, we will use binding tape and a hot glue gun. Just open the tape, pull it off and place it right under the cut rug edge. Press on the carpet edge after that with the help of the hot glue gun, apply some glue on the binding and press the tape and the rug together. In this easy way, you will get and you do it yourself rug edge. It will look very discreet so your guests won’t even tell you that you made the cut by yourself.

Now that you know how the process looks, let’s see what are the frequently asked questions about this process.

Why Would You Resize A Rug?

If your rug doesn’t fit in your room but is in excellent condition, cutting your rug may be the ideal option for you! That is a fast and easy fix and the solution to your rug size dilemma. If you’re still choosing the rug, check out our guide on how to pick a rug size.

How Much Does It Cost To Cut a Rug?

Although costs vary, you usually spend from $15 to $20 on each cut. For example, some tools or other custom-made blanks can cost at least $10. Binding accessories cost approximately $2.

Expect the cost of cutting and binding a standard area rug to start at $ 1.50 per linear foot and increase to $ 4 per linear foot (a unit used to measure the circumference of the rug). The price varies depending on the kind of weave and type of adhesive tape used (fabric, cloth, or leather) and the adhesive method used (stitching, stapling, or sticking).

It is crucial to note that a rug cutting process usually takes a long time to cut and get ready. It is expected that a standard rug may take a few hours to complete. So it’s more cost-effective to try it yourself at home instead of looking for expensive assistance from some companies.

How to Cut a Rug without It Fraying

Different types of carpets respond differently to material cutting. The carpet binding step described above prevents the rug from fraying. It is important to stick the binding with the provided double-sided tape and use a hot adhesive near the binding curl.

Generally speaking, there are a few methods to make sure the rug won’t be fraying:

  1. Use the Tape 

Another way to keep your rug from fraying is by using tape. It holds the rugs in such a way that they look neat on the floor, keeps them from sliding around, and keeps the edges flat. Plus, your rug is no longer a tripping hazard.

Another option is using carpet clips. Washable and reusable edge clips are best for toilet rugs and small rugs.

cutting a rug

If you have rugs and home and want a semi-permanent solution to keep them plain on the floor, get a rug tape that won’t leave a stubborn glue residue when you need to remove it. 

  1. Moving furniture with sliders 

Many home scratches occur when we are moving furniture. You can use furniture sliders to protect your rugs from fraying when moving sofas and other pieces of furniture. 

Sliders act as a coaster for your furniture and make your large furniture a lot easier to move around.

How to Fix the Frayed Rug Edges

If your rug looks worn out and frayed, don’t be afraid, because it can be fixed. Read on to learn how to repair frayed rug edges.

  1. Cut off the edges of the old rug.

The easiest solution is to consider cutting off a worn part of the rug. This may seem like an easy job, but it is not the case. Then, you need to measure your rug well and mark it with chalk so later you can cut it accurately instead of rolling it sideways.

Cutting the rug with a utility rug razor is the most practical and probably the best idea for this job. You can also do it with a rug cutter. No matter which tool you choose to cut the rug, make sure it is both new and sharp. If your knife is not sharp and rusty, it will damage your rug, and it will look even worse than it does now.

  1. Fixing with rug tape 

Instabind and other carpet tapes are easy-to-use products that you can put on the edge of the rug. They create a nice finishing effect and can also improve the attractiveness of the rug. To use this product, you will need scissors, a glue stick, and a hot glue gun.

First of all, cut a short section from one end of Instabind, and apply it starting from the center of the carpet fringe. If for some reason Instabind is out of stock, you can also use this rug adhesive tape available on Amazon. Slowly tear off the sticker. Continue to press the rug binder on the rug as hard as possible.

You can utilize a large book to put the pressure down. Just cut and fold the binder at the corner to form the corner of the bind. Alternatively, you can trim the bind to meet the origin point. Make the final adjustments. Then tape the edge of the binding to the edge of the rug. Finally, there is a new rug edging!

And you have a safe rug. There are many styles and types of rug edging, depending on your preference. These are the most common ones.

Artificial leather technique – this method is almost like regular binding, but without visible seams, it is more long-lasting compared to them. Synthetic leather models are available in a variety of standard shades and 48-foot rolls.

Usual binding method – if you need your rug to have a traditional look, this usual binding method is your best choice. 

Cotton Fabric – this cotton fabric is ideal for bonding wool and cotton fiber rugs.

Synthetic Binding – this style is also longer-lasting than ordinary binding.

Cotton Style – even without expensive sewing machines, you can still get beautiful rugs. All this is due to the Instabind style. It has a variety of colors of cotton thread to choose from.

Rope Edging – a lot of buyers use the Instabind Rope method in yachts/boats and nautical interiors to give them a nautical appearance.

Outdoor Marine Style – this type of binding has the ability to resist mold and ultraviolet radiation and is especially suitable for outdoor use.

  1. Fix the edge of the carpet 

Transition tape is a safety device in your home. Use a transition strip when changing from one floor to another. For example, from tiles to carpets. There are different transitions, it is very important to choose the transition that suits your floor. 

Metallic rug transition strip: a metal rug transition strip is the most commonly used. The rug transition strip has to cover 1/2 of the carpeting and 1/2 of the other floors.

Conclusion

As you see, cutting the rug is a relatively easy process, and by following the tips above, you will be happy with how it looks. It’s a perfect DIY, and I hope you are now inspired to make the changes!

Back to top button